Frequencies Rotation at High Sound Pressure Levels Toward Low Frequencies

Today, analyzing of sound pressure level and frequency is considered as an important index in human society. Sound experts believe that analyzing of these parameters can help us to better understanding of work environments. Sound measurements and frequency analysis did to fix the harmful frequency in all sections in Shiraz gas power plant with sound analyzer model BSWA 308. The sound pressure levels (L_P) and the one and one-third octave band were continuously measured in A and C weighting networks and slow mode for time response. Excel 2013 and Minitab 18.1 software used for statistical calculations. Results analyzed by Minitab 18.1 software. The highest harmful frequency in Shiraz Gas Power Plant (SGPP) was 50 Hz with 115 dB. The sound pressure level (SPL) ranged from 45 dB to 120 dB in one-third octave band and weighting network C. The maximum sound pressure level was in Craft electricity generator with 105.3 dB and 67 Hz. Sound pressure level in surrounded environment was 120 dB. According to the results, in this industry the sound pressure level exceeded the Occupational Exposure Level of Iran (OEL). The value of sound pressure level were higher than the Standard of occupational health. SGPP consumes 47000 cubic meters of natural gas per hour to produce 100 MW (Mega Watt) of electricity. It is very high and it is not economical and cost effective. These numbers indicate that the power plant’s efficiency is low. It could be concluded that the noise pollution is an important issue in these industries. Moreover, SGPP produce noise with loss energy. Frequencies rotation at high sound pressure levels toward low frequencies were happened.     

Noise Reduction in Spur Gear Systems

This article lists some tips for reducing gear case noise. With this aim, a static analysis was carried out in order to describe how stresses resulting from meshing gears affect the acoustic emissions. Different parameters were taken into account, such as the friction, material, and lubrication, in order to validate ideas from the literature and to make several comparisons. Furthermore, a coupled Eulerian–Lagrangian (CEL) analysis was performed, which was an innovative way of evaluating the sound pressure level of the aforementioned gears. Different parameters were considered again, such as the friction, lubrication, material, and rotational speed, in order to make different research comparisons. The analytical results agreed with those in the literature, both for the static analysis and CEL analysis—for example, it was shown that changing the material from steel to ductile iron improved the gear noise, while increasing the rotational speed or the friction increased the acoustic emissions. Regarding the CEL analysis, air was considered a perfect gas, but its viscosity or another state equation could have also been taken into account. Therefore, the above allowed us to state that research into these scientific fields will bring about reliable results.     

RIG型磁光薄膜的研究进展及应用

随着光通信技术与光子集成电路的发展,非互易性器件作为光通信系统中重要的组成部分得到了越来越广泛的研究与应用。基于磁光效应制成的磁光隔离器和环行器是目前应用最为广泛的非互易性器件,为了将非互易性器件整块集成在硅片上,需制备性能与块状磁光材料相当的磁光薄膜。在近红外通信波段(1 550 nm),以钇铁石榴石(Y₃Fe₅O₁₂,YIG)为代表的稀土铁石榴石(RIG)具备优良的磁光效应,是最具应用前景的磁光材料之一。研究发现,使用稀土离子对YIG薄膜进行掺杂可以有效改善其磁光性能,尤其是Bi³⁺和Ce³⁺掺杂的YIG表现出巨法拉第效应。本文首先介绍了法拉第效应原理,介绍了三种常见磁光薄膜的生长方法,回顾了近年来的主要研究成果,介绍了磁光薄膜在光隔离器和环行器中的应用,最后对磁光薄膜的未来发展趋势进行了展望。     

Ni单原子催化剂表面CO2电还原动力学的电化学谱学解析

针对Ni单原子催化剂表面的CO₂电还原反应(CO₂RR), 提出了以Ni为活性位点的“单中心”机理以及同时借助Ni位点还原和碳氮锚定位水解的“双功能”机理. 依据稳态极化的实验结果, 开展了CO₂RR的动力学解析与模型参数的敏感性分析; 借助暂态模型方程, 分别获取可表达CO₂RR线性与非线性频响特征的电化学阻抗谱(EIS)与总谐波失真(THD)谱. 研究结果表明, CO₂的溶解分压对CO₂RR活性影响最显著. 若CO₂RR遵循“单中心”机理, Ni位点COOH_ads的形成为速率控制步骤; 但若为“双功能”机理, 碳氮锚定位的水解与Ni位点的CO_2,ads还原同为速率控制步骤. EIS理论上可用于区分CO₂RR的“单中心”机理与“双功能”机理; 与之相比, THD谱在CO₂RR的机理识别中并无优势.     

Everything you wanted to know about phase and reference frequency in one- and two-dimensional NMR spectroscopy

The fundamental concept of phase discussed in this tutorial aimed at providing students with an explanation of the delays and processing parameters they may find in nuclear magnetic resonance (NMR) pulse programs. We consider the phase of radio-frequency pulses, receiver, and magnetization and how all these parameters are related to phases and offsets of signals in spectra. The impact of the off-resonance effect on the phase of the magnetization is discussed before presenting an overview of how adjustment of the time reference of the free induction decay avoids first-order correction of the phase of spectra. The main objective of this tutorial is to show how the relative phase of a pulse and the receiver can be used to change the reference frequency along direct and indirect dimensions of NMR experiments. Unusual of phase incrementation with non-90° angles will be illustrated on one- and two-dimensional NMR spectra.     

Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric down-conversion in the periodically-poled lithium niobate on insulator (LNOI) waveguide. We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum, such as narrowing, broadening, and splitting. We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth. Our study may promote the development of on-chip photon sources in the LNOI platform, as well as opens up a way to engineer photon frequency state.     

多振子声子晶体的低频特性研究

本文设计了一种由硅橡胶包覆层包裹4个钨振子的新型声子晶体结构,通过有限元法计算该结构的色散曲线、振动模态和传输损失谱。结果表明,该结构的带隙范围为18.85~225.28 Hz,与传输损失谱频率衰减范围相吻合,能够有效抑制20~200 Hz的弹性波在声子晶体中传播。通过分析色散曲线上点的振动模态,说明带隙产生的原因。本文讨论了声子晶体板的缺口角度和振子之间的纵向和横向间距对带隙的影响,结果表明:当缺口角度减小时,带隙下边界几乎保持不变,带隙上边界升高从而增加了带隙的宽度;振子之间横向或纵向间距增大时,带隙下边界和上边界均上升,带隙变宽,进而优化了声子晶体模型的带隙。同时声子晶体板的缺口设计能够节省材料,从而减轻结构的质量。     

田字形地震超材料甚低频宽带隙机理

在地球中传播的地震波主要有体波和表面波,而表面波中Rayleigh波对建筑物造成的破坏最为强烈。针对Rayleigh波的振动控制,提出一种田字形超材料结构。相比于传统的地震超材料,这种超材料屏障是由外部口字形框体内部嵌套十字形柱体组成,形成4个可填充区域,其外部框体采用部分埋入的方式,具有高强度、强稳定性、填充方式灵活的特点。应用有限元法计算了田字形超材料的能带结构和传输特性,并通过分析带隙边界处模态振型可知,带隙的打开是由于柱体的局域共振。结合带隙机理可知,柱体结构中土壤填充量不同可改变柱体的质量,形成不同的谐振频率,产生甚低频带隙。为进一步拓宽带隙,设计研究了正、负梯度的质量填充方式,均可得到3.3~13.1 Hz甚低频宽带隙,在谐振频率范围内两者的隔震方式分别为Rayleigh波彩虹捕获和Rayleigh波到体波的转化。最后,采用EI-Centro地震波对填充屏障进行了时程验证,加速度最大幅值衰减超过80%,为地震超材料在减震隔震方面应用提供了新的设计思路和方法。     

Self-Accelerating Diels–Alder Reaction for Preparing Polymers of Intrinsic Microporosity

It is a formidable challenge in polycondensation to simultaneously construct multiple covalent bonds to prepare double-stranded polymers of intrinsic microporosity (PIMs) with fused multicyclic linkages. To the best of our knowledge, this is the first study to develop a self-accelerating Diels–Alder reaction for successfully preparing double-stranded PIMs with fused multicyclic backbone structures. A self-accelerating Diels–Alder reaction was developed based on the [4+2] cycloaddition of sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) and ortho-quinone compounds. In this reaction, the cycloaddition of ortho-quinone with the first alkyne of DIBOD activates the second alkyne, which reacts with ortho-quinone at a rate constant 192 times larger than that of the original alkyne. Using this self-accelerating reaction to polymerize DIBOD and spirocyclic/cyclic difunctional ortho-quinone monomers, a novel stoichiometric imbalance-promoted step-growth polymerization method was developed to prepare PIMs. The resultant PIMs possess intrinsic ultramicropores with pore sizes between 0.45 to 0.7 nm, high specific surface areas above 646 m² g⁻¹, and good H₂ separation performance.